Description

VT300PW "DYNA-FLYERS" Series is the inline mixers machine works according to the rotor-stator principle. It is not placed inside but outside the main vessel (can be multiple vessel) and connected to it by a piping system. The liquid in the tank is circulated in a loop, as it would be with a pump.Because of the special geometry of the rotor, the liquid builds up a vacuum inside the dispersing chamber. This vacuum is used to induct powder into the liquid stream directly from any container without dust or losses.
Inside the dispersing chamber, high shear energy is applied to the liquid stream and the surface of the liquid is strongly expanded to accept the powder that is inducted. In the same way, the powder is transported via vacuum (IN FRONT) and reaches the dispersing chamber expanded as well,and the distance between the particles is increased.Both streams (liquid and powder) reach the dispersing chamber in separate streams then come together into the dispersing chamber and are dispersed with a defined shear gradient. This results in an ideal prerequisite for the wetting of the individual particles. This procedure allows the fine distribution of the components at the moment of wetting and in many cases an improvement of the

properties of the product can be achieved compared to conventional powder addition systems

VIDEO DEMO OF PRODUCTS 

https://youtube.com/edit?o=U&video_id=S12u3pfnT5g

-flour suck inside inline chamber to mix with water to become paste

youtube.com/watch?v=kN-b6ncBcek

-xantham gum suck in to circular with water to become paste products

Main Features

> GMP Compliant
> Save time and energy
> Reproducible mixing quality and results
> Reliable and predictable scale-up
> 100% inspection of components
> API 610 Compliant
> Custom made to meet electrical standards such
 as NFPA, NEC, CSA for hazardous locations
> CRN components available

1.No more duct flying when powder inducted from BigBag,Silo or paper sack. 

2.Explosion and other health problems is reduced 

3. Agglomerate-free and reproducible products may be produced in a very short time for sticky powder. 

4.Reduced density results in reduced VOC emissions due to the increase in volume means higher profit.

5. Reduce the binder and matting agents required to be added.

Phone: +603 89614628 | Fax: +603 89617048 | Cell Phone :+(6)017-3576175 |Email: kenny.wong@thesuccesstechnic.com , Internet: successtechnic.com, , thesuccesstechnic.com ,homogenizer.com.my, successte.lelong.my Youtube: youtube.com/successte ,Facebook: facebook.com/Success-Technic-Industries-243226099198557 ,Skype : ppgg26
Add :27, Jalan 6/2 , Tmn.Industri Selesa Jaya,Off Jalan Balakong,43300 Seri Kembangan,Selangor, Malaysia.
Legal Form: Private Limited - Success Technic Trade Register No. ( Malaysia ) : 614305-M | Company Directors: Wong Chor Kiat--

Please visit our Alibaba minisite for more products details: thesuccesstechnic.trustpass.alibaba.com